Rena L-350 Specifikace

L-250, L-350 TABBER/LABELER OPERATIONS MANUAL Revised 2-19-08 Part #: M-3432

-8- LABEL SENSOR ADJUSTMENT THE L-250/350 HAS BEEN FACTORY CALIBRATED TO DETECT THE PRESENCE AND ABSENCE OF LABELS UNDER MOST CONDITIONS. HOWEVER, WIT

-9- CONTROL PANEL FUNCTIONS A. Label vertical position adjustment in 1/2" increments B. Label vertical position adjustment in 1/32" inc

-10- at the edge of the peeling mechanism. If the sensor does not see the label, any attempt to run the labeler will result in failure to feed the med

-11- USING AN OPTIONAL CONVEYOR WITH THE L-250/350 Warning: Before connecting a conveyor to the power outlet on the L-250/350, please be sure it meets

-12- 11. With the tabs feeding straight through the clamp, move the two tracking guides [Figure 11A] into contact with the backing paper edge. Tigh

Copyright © 2008 All rights reserved

SAFETY PRECAUTIONS THIS EQUIPMENT PRESENTS NO PROBLEM WHEN USED PROPERLY. HOWEVER, CERTAIN SAFETY RULES SHOULD BE OBSERVED WHEN OPERATING THE L-250/

-1- SPECIFICATIONS L-250 TABBER/LABELER DIMENSIONS: 16 1/2" W x 19" H x 18" L SPEED – TABBER: Variable from 5,000 - 20,000 per hour (

-2- ASSEMBLING THE L-250/350 1. Remove all packing and parts supplied. Check and identify all parts with the ones listed below. • Envelope Guide 90-

-3- SETUP PROCEDURES BEFORE USING THE L-250/350, SEVERAL ADJUSTMENTS MUST BE MADE TO SET UP MEDIA THICKNESS AND SIZE MEDIA THICKNESS ADJUSTMENT 1. Lo

-4- SETTING UP THE L-250/350 AS A LABELER 1. Remove top exit roller (media pressure roller) by pulling it out of the plastic spring-loaded brackets.

-5- Figure 5a Tabs Only Figure 5 Labels/Stamps SETTING UP THE L-250/350 AS A TABBER FAN-FOLDED TABS 1. Remove the top exit roller from the p

-6- SETTING UP THE L-350 TO APPLY STAMPS ROLL OF STAMPS 1. Install the TR-10 Reel Assembly on the machine by hooking the rear bracket to the center t

-7- Figure 8 B9. Thread the stamps into the L-350 following the LABEL THREADING DIAGRAM [Figure 5]. 10. Position the stamps by moving the entire sta